cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1212
Views
0
Helpful
2
Replies

MDS 9124 error message fc-4 types not registered

dguse
Level 1
Level 1

I have added an IBM AIX host to our SAN and cannot get it to see the NetApp array. I can fcping the host and flogi database looks correct. Zone is configured correctly.  If I run a sh fcns internal reject-log vsan 10 I get the below error but cannot find any documentation as to what it is caused by.  Anyone know what is causing the issue?

sh fcns internal reject-log vsan 10

VSAN:10    FCID:0x650900
------------------------
Command                     :NS_CMD_GID_FT
Reject Reason               :unable to perform command
Reject Reason Explanation   :fc-4 types not registered
Time                        :Wed Apr 14 13:57:42 2010

Config info is as follows:

fcsw2com4# sh flogi data
---------------------------------------------------------------------------
INTERFACE  VSAN    FCID            PORT NAME               NODE NAME      
---------------------------------------------------------------------------
fc1/1      10    0x650200  10:00:00:00:c9:60:16:7b  20:00:00:00:c9:60:16:7b    
fc1/2      10    0x650300  10:00:00:00:c9:60:39:2e  20:00:00:00:c9:60:39:2e    
fc1/3      10    0x650000  50:0a:09:82:96:d8:25:f0  50:0a:09:80:86:d8:25:f0    
fc1/4      10    0x650100  50:0a:09:82:86:d8:25:f0  50:0a:09:80:86:d8:25:f0    
fc1/5      10    0x650800  10:00:00:00:c9:4c:7d:46  20:00:00:00:c9:4c:7d:46    
fc1/6      10    0x650900  10:00:00:00:c9:66:c0:ab  20:00:00:00:c9:66:c0:ab  <<< this is the new device  
fc1/7      10    0x650600  10:00:00:00:c9:7d:34:9c  20:00:00:00:c9:7d:34:9c    
fc1/8      10    0x650500  10:00:00:00:c9:7d:39:7e  20:00:00:00:c9:7d:39:7e   

Total number of flogi = 8.

fcsw2com4# sh fcalias
fcalias name SRV_p510_ap vsan 10
  pwwn 10:00:00:00:c9:7d:34:9c

fcalias name SRV_p510_db vsan 10
  pwwn 10:00:00:00:c9:7d:39:7e

fcalias name SRV_p550b vsan 10   <<< this is the new device
  pwwn 10:00:00:00:c9:66:c0:ab

fcalias name SRV_vios1 vsan 10
  pwwn 10:00:00:00:c9:60:16:7b
  pwwn 10:00:00:00:c9:60:39:2e

fcalias name STO_lvtlarsa01_1b vsan 10
  pwwn 50:0a:09:82:96:d8:25:f0

fcalias name STO_lvtlarsa02_1b vsan 10
  pwwn 50:0a:09:82:86:d8:25:f0

fcalias name p510_netbackup vsan 10
  pwwn 10:00:00:00:c9:4c:7d:46

fcsw2com4# sh zone
zone name ZNE_vios1 vsan 10
  fcalias name STO_lvtlarsa01_1b vsan 10
    pwwn 50:0a:09:82:96:d8:25:f0
 
  fcalias name STO_lvtlarsa02_1b vsan 10
    pwwn 50:0a:09:82:86:d8:25:f0
 
  fcalias name SRV_vios1 vsan 10
    pwwn 10:00:00:00:c9:60:16:7b
    pwwn 10:00:00:00:c9:60:39:2e
 
  fcalias name SRV_p510_ap vsan 10
    pwwn 10:00:00:00:c9:7d:34:9c
 
  fcalias name SRV_p510_db vsan 10
    pwwn 10:00:00:00:c9:7d:39:7e
 
  fcalias name p510_netbackup vsan 10
    pwwn 10:00:00:00:c9:4c:7d:46
 
  fcalias name SRV_p550b vsan 10
    pwwn 10:00:00:00:c9:66:c0:ab

fcsw2com4# sh zoneset
zoneset name PROD_B vsan 10
  zone name ZNE_vios1 vsan 10
    fcalias name STO_lvtlarsa01_1b vsan 10
      pwwn 50:0a:09:82:96:d8:25:f0
   
    fcalias name STO_lvtlarsa02_1b vsan 10
      pwwn 50:0a:09:82:86:d8:25:f0
   
    fcalias name SRV_vios1 vsan 10
      pwwn 10:00:00:00:c9:60:16:7b
      pwwn 10:00:00:00:c9:60:39:2e
   
    fcalias name SRV_p510_ap vsan 10
      pwwn 10:00:00:00:c9:7d:34:9c
   
    fcalias name SRV_p510_db vsan 10
      pwwn 10:00:00:00:c9:7d:39:7e
   
    fcalias name p510_netbackup vsan 10
      pwwn 10:00:00:00:c9:4c:7d:46

   
    fcalias name SRV_p550b vsan 10
      pwwn 10:00:00:00:c9:66:c0:ab

fcsw2com4# sh zoneset active
zoneset name PROD_B vsan 10
  zone name ZNE_vios1 vsan 10
  * fcid 0x650000 [pwwn 50:0a:09:82:96:d8:25:f0]
  * fcid 0x650100 [pwwn 50:0a:09:82:86:d8:25:f0]
  * fcid 0x650200 [pwwn 10:00:00:00:c9:60:16:7b]
  * fcid 0x650300 [pwwn 10:00:00:00:c9:60:39:2e]

2 Replies 2

dguse
Level 1
Level 1

Also note I am running:

Software
  BIOS:      version 1.0.0
  kickstart: version 3.1(2)
  system:    version 3.1(2)

  BIOS compile time:       10/04/06
  kickstart image file is: bootflash:/m9100-s2ek9-kickstart-mz.3.1.2.bin
  kickstart compile time:  1/18/2007 7:00:00 [02/04/2007 09:27:18]
  system image file is:    bootflash:/m9100-s2ek9-mz.3.1.2.bin
  system compile time:     1/18/2007 7:00:00 [02/04/2007 09:44:36]


Hardware
  cisco MDS 9124 ("1/2/4 Gbps FC/Supervisor-2")
  Motorola, e500 with 515056 kB of memory.

is there a reason you have one zone for all of the systems ? It's considered best practice to have either single initiator - single target zoning or single initiator - multiple targets

Once you have zone your AIX box to the NetApp unit, run "cfgmrg". Typically that will force the system login to the array.

@dynamoxxx
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: