External Radius Authentication

Unanswered Question
Apr 15th, 2010
User Badges:

Has anyone else setup the external radius authentication for their administrators?  I am thinking about turning it on to get better accounting of who made specific changes to the appliance and would rather use an existing authentication database.  If I read correctly the communication to the radius box only connects over interface M1?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
khoanguy Fri, 04/16/2010 - 13:17
User Badges:

From the User Guide:

"Note — AsyncOS for Web connects to the external server over the M1 interface only."

So yes, only on M1 interface.

Jeremy Smith Wed, 04/21/2010 - 09:38
User Badges:

I have radius configured, I am unable to get any communication from the applicance to my radius server.  Have done packet captures and cannot see any traffic whatsoever leaving the appliance.

khoanguy Wed, 04/21/2010 - 09:45
User Badges:

There should be data on port 1812 (from wireshark use tcp.port==1812) when login is attempted.  If not you might need to file a case with Support.


This Discussion

Related Content