Hi,

I have the exact same problem with 2900 and 3900 using 15.1(3)T, 15.1(3)T2 and 15.1(4)M1 releases.

I use "ccm-manager config" to download the MGCP configuration from CUCM 6.1.5 and each time I reload or a enter "no ccm config, ccm config" to force the download, all the mgcp config is reset to default.

Before the reload:

mgcp call-agent XXXXXXXXXXXXX service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp rtp unreachable timeout 1000 action notify

mgcp modem passthrough voip mode nse

mgcp package-capability rtp-package

mgcp package-capability sst-package

mgcp package-capability pre-package

mgcp default-package fxr-package

no mgcp package-capability res-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp fax rate 14400

mgcp fax t38 nsf 000000

no mgcp fax-relay sg3-to-g3

mgcp rtp payload-type g726r16 static

After the reload:

mgcp call-agent XXXXXXXXXXXXX service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp modem passthrough voip mode nse

mgcp package-capability rtp-package

mgcp package-capability sst-package

mgcp package-capability pre-package

mgcp default-package mt-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp fax rate 14400

mgcp fax t38 inhibit

mgcp fax t38 nsf 000000

no mgcp fax-relay sg3-to-g3

mgcp rtp payload-type g726r16 static

The problem is that I use now 2900 and 3900 ISR G2 routers, and the version 15.x is the minimum.

For the other routers (~10) I dont have problem because I use the 12.4(20)T3 and the config is well saved.

I will try older IOS versions but I would appreciate if someone can advice me directly.

Thank you for your help.

Yorick

Hi Yorick,

Did you try 15.1(1)XB?

Fixed-In

12.4(24)MD

12.4(24)T2

15.1(0.7)T

15.1(0.2)PI12f

15.0(1)M0.5

15.1(24.6.12)PIL13

12.4(22)T4

15.1(1)XB

15.1(0.2.7)PIB13

15.1(1.5.1)PIA13

15.1(0.0.10)PIL14

15.1(1.7.1)PIA14

12.4(24)GC2

12.4(22)MDA4

12.4(24)MDA1

15.1(0.0.3)PIL15

Cheers!

Rob

Hi Rob,

Unfortunately, I cannot find it in the Download center.

I can only access to 15S, 15M, 15T and Special and Early, but no one contains a XB release .

Do you think I have to open a case to get it?

I am afraid now because I am pretty sure I have several customers with ISR G2, configured for T.38 on C2900 and C3900. If they reload the routers, no more faxes...

How is it possible a so severe problem is present in so many versions?

Maybe it is related to the version of our CUCM as well (6.1.5)?

I will do some tests tomorrow morning in a customer site owning a 2911 and using T.38 with CUCM 7.1.5.

Thank you for your help.

Yorick

Hi Yorick,

I think a TAC case is an excellent idea. I'm guessing they can find a more current

IOS version that contains the fix for this and set it up for you as a special

download. You should not have to deal with this issue every time the router re-loads.

Cheers!

Rob

Hi Rob,

For your information, a case is opened to troubleshoot this problem, I still don't get a satisfying answer but in the sametime I compared the same test with different CUCM version.

It seems that the problem only occurs with CUCM 6.1.x. I think it's because the CUCM 7.x and 8.x contain more MGCP parameters (t.38 package, and so on). MGCP config from CUCM webpages is very (too) basic in 6.x and I think in IOS 15.x some parameters are defaulting to a certain value when the parameter does not come populated from the CUCM.

I will post the update as soon as it will be resolved.

Yorick

We've suffered with this problem for a number of years, across 2800s & 2900s; both CUCM versions 6 & 7; a range of IOS versions including 12.4T, 15.1 and 15.2.

Our latest incarnation is a 2951 running 15.2(3)T and CUCM 7.1.5.

It's sad to think that it's never been adequately solved!

Thanks, Steve