cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
917
Views
0
Helpful
1
Replies

SIP-to-SIP caller id with CUBE??

wtribble80
Level 1
Level 1

Can anyone explain the default behavior of CUBE in regards to caller ID in a SIP-to-SIP environment?

This is our setup:  CUCM 7.x <----sip---> CUBE <----sip-----> Paetec SIP service

The recommended configuration from Cisco for Paetec is to use  "no remote-party-id" in the sip-ua configuration.  However, I should still be able to get named caller id in the FROM header.  I see names being passed to us from Paetec, but CUBE strips the names in the TO and FROM headers of the INVITE message.

The only documentation i can find regarding SIP and clid are concerned with ISDN to SIP.  I need to understand the SIP to SIP clid behavior and how I can manipulate it.  This is the only Cisco documentation I have found so far:  http://www.ciscosystems.com/en/US/docs/ios/12_4t/12_4t4/FeatTP.html#wp1079374

We are using the latest version of code on the gateway - 12.4(24)T3

Here is an example of what I see on the packet trace.  IP's and numbers have been changed for privacy.

------------FROM PAETEC to CUBE-------------

From: "Name of Client "<sip:5555555555@172.16.1.1;user=phone>;tag=1691108409-1271338395236-
To: "Ourbusinessname"<sip:5558675309@10.10.2.13;4342608is=4342608is-u27gphf06l0ob>

-----------FROM CUBE to Call Manager-----------

From: sip:5555555555@172.16.1.1;tag=2197C574-1828
To:  <sip:5558675309@10.10.1.21>

1 Reply 1

wtribble80
Level 1
Level 1

bump

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: