is it possible to configure the following:
Cisco 3560 with 3 VLANS
vlan1 > users and isp1
vlan2> users and isp2
I need the users in vlans 1 and 2 to be able to print to vlan3 but not be able to pass any traffic to the users on other vlans and also be able to access the internet via the isp connected to their vlan.
I work for a "frugal" company and they are using the routers supplied by the ISP so they are not cisco, I have gotten as far as I can create the vlans and print across to vlan 3; the users cannot pass traffic to the users on the other vlan. it works fine until i connect the routers then it fails, users cannot ping to vlan3 and this is where i get lost.
each isp router is dhcp / dns for the users connected to the respective vlan, do i need to change this so the switch does dhcp or am i missing something?