Reset interface Dot11Radio0 AP 1131G-E-K9.

Unanswered Question
Apr 19th, 2010


Look an the next problem.

Permanetly reset interface. Reboot AP not help.

Where is find problem?

sh interfaces dot11Radio 0
Dot11Radio0 is up, line protocol is up
  Hardware is 802.11G Radio, address is 0027.0d55.da70 (bia 0027.0d55.da70)
  MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input never, output 00:00:00, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/1127/1080/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/30 (size/max)
  5 minute input rate 59000 bits/sec, 57 packets/sec
  5 minute output rate 401000 bits/sec, 47 packets/sec
     7767310 packets input, 943395390 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 input packets with dribble condition detected
     10457785 packets output, 4258330274 bytes, 0 underruns
     3854 output errors, 0 collisions, 86 interface resets

I have this problem too.
0 votes


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode