04-19-2010 10:34 AM - edited 03-06-2019 10:41 AM
Dear friends,
There is Cisco 3745 router with the following output:
sh env all
Power Supply 1 is present.
Fan status: normal
Input Voltage status: normal
DC Output Voltage status: normal
Power Supply 2 is present.
Fan status: Warning - failure
Input Voltage status: normal
DC Output Voltage status: normal
48V Power Supply 3 is not present.
48V Power Supply 4 is not present.
Board Temperature: normal.
wcmcq-dial#sh power inline
PowerSupply SlotNum. Maximum Allocated Status
----------- -------- ------- --------- ------
INT-PS 0 0.000 0.000 PS1 ABSENT PS2 ABSENT
Earlier we were even getting fan rotation syslog messages. However, after they have disappeared but the fan isn't spinning still?
Is it advisable to replace PS2?
Thanks a lot
Gautam
04-19-2010 11:11 AM
Hi Gautam,
Yes, PS2 apear to be out. RMA it.
Reza
05-24-2013 01:01 PM
Hi gautamzone,
Please let me know if the change of PS2 solve your problem.
I'm with the same problem on C3745.
Thank you!
05-24-2013 03:29 PM
RMA your faulty fan can fix it.
Sent from Cisco Technical Support Nintendo App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: