ASA5505 & VPN clients

Unanswered Question
Apr 19th, 2010

I have an ASA5505 and a PIX515.

Right now clients with Cisco VPN software can authenticate to the PIX and access local servers.

I am doing this via the "vpngroup bob address-pool vpnusers" and so on.

Can anyone provide a simple sample config, or link, to instructions to setup the ASA this way?  So clients using Cisco VPN will be able to dial into the ASA and access local servers?

Any tips & links much appreciated.

(i went through the vpn wizard on the ASA gui, but i'd rather do it via CLI so i can see what is going on)

[also, is there a Cisco VPN client for Windows 7 x64?)

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jennifer Halim Mon, 04/19/2010 - 19:58

Here is a sample configuration on ASA to configure ipsec remote access vpn client:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008060f25c.shtml

Split tunnel sample configuration:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml

Windows 7 64-bit is supported on VPN Client version 5.0.07.0290 (released last week).

Hope that helps.

Actions

This Discussion