voice port showing OFF-HOOK even after disconnect call

Unanswered Question
Apr 20th, 2010
User Badges:

Hi


We have UC520 with 4 FXO & two analog line, My scenario is when anybody calls on 08 9377 3097 (voice-port0/1/1) means All incoming call which are coming  on 08 9377 3097 (voice-port0/1/1) should be diverted to 206 (ext.). If anybody are unable to receive call on 206 within 15 sec. then call should be divert to my  Mobile from 08 9377 0540 (voice-port0/1/0)


After disconnecting Incoming call means Hang up the phone & make call again on same no. Voice-port 0/1/1 that time I found  08 93773097 (Voice-port 0/1/1 ) is still engaged(busy) & also saw voice port is going to OFF-HOOK.

I have use belo configuration

voice-port 0/1/0
supervisory disconnect dualtone mid-call
output attenuation -6
cptone BR
timeouts call-disconnect 5
timeouts wait-release 5
timing sup-disconnect 1000
connection plar opx 202
caller-id alerting dsp-pre-allocate
!
voice-port 0/1/1
supervisory disconnect dualtone mid-call
output attenuation -6
cptone BR
timeouts call-disconnect 5
timeouts wait-release 5
timing sup-disconnect 1000
connection plar opx 206
caller-id alerting dsp-pre-allocate


Is there anyone who can point me in the right direction

Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content