WLC 4400 SNMP

mserrao · ‎04-20-2010

Hi all,

I'm using WLC 4400, with (4.2.176.51M (Mesh)) software in a wireless mesh network (LAP1510 and AIR-LAP1242AG-E-K9 APs).

I'm trying to monitor the traffic in the AP interfaces (802.11a/n,802.11b/g/n and Fast Ethernet) with SNMP (obviously the queries must but done at the WLC) but I can't find the correct OIDs for inOctetcts and OutOctects in the MIBS. Can someone help me?

Thx in advance.

Regards

Lucien Avramov · ‎04-20-2010

You just need to walk IF-MIB and you will find it.

It's the standard OID for IF-MIB::ifInOctets

# 1.3.6.1.2.1.2.2.1.10.1 (ifInOctets)
# 1.3.6.1.2.1.2.2.1.16.1 (ifOutOctets)

mserrao · ‎04-20-2010

Hi.

Thx for the feedback. But these OID will return the ifInOctets and the ifOutOctets of the WLC interfaces.

I'm trying to monitor the interfaces of the APs (11a,11b/g,fastethernet).

Regards