PPOE thru 1760 with ADSL WIC

Unanswered Question
Apr 20th, 2010

Good evening I am new agian to cisco as I am just getting back into routers and I am at a loss here and hope someone can help. I have a cisco 1760 with a ADSL wic that I need to setup to allow pppoe bridging. I need to connect a computer to the fastethernet0 and have it establish the pppoe connection so that the external IP shows on the internal interface. I have tried the following config to no luck and at a stand still please reply with any suggestions

------Cisco 1760 Config ----------------------------

service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname smadsl
!
no ip routing
!
interface ATM0/0
no ip address
atm vc-per-vp 256
pvc 8/35
encapsulation aal5snap
!
dsl operating-mode auto
bridge-group 1
!
interface FastEthernet0/0
no ip address
speed auto
bridge-group 1
!
ip classless
no ip http server
!
bridge 1 protocol ieee
!        
line con 0
transport input none
line aux 0
line vty 0 4
login

Thanks for any help you can provide

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion