This seems to be an Odd issue we are having. Here is the Call Flow. We have a SIP connection from Call Manager to a 2851 CUBE router then SIP from the CUBE to our Provider. Calls for the most part are working fine. However I call one particular number that is somewhere in New Orleans (We are in the Washington DC area) I get a generic "Hello Cisco Unity Connection Messaging System". However if I call that same number from my cell phone I get "Hello you have reached company ABC....." So I am trying to figure out why when I call from the Call Manager Through the SIP Trunk it goes to the generic message on that remote site, but I call from anywhere else it works fine.