1130 AG AP and Broadcast of the SSID

Unanswered Question
Apr 21st, 2010

We have 3 1130's installed and 2 vlans, one public and one private. I need to broadcast my private SSID but cannot find the setting to allow this. Can someone advise me on the location of the setting?

chaz

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Kayle Miller Wed, 04/21/2010 - 06:43

Charles,

     I assume you are using IOS (Autonomous) Access points.. if so you need to enable guest-mode on the Dot11 SSID

so it would look something like this

dot11 ssid private
    vlan x
    guest-mode

Hope this helps.. Please feel free to rate it.

chaznsc@@ Wed, 04/21/2010 - 07:28

Forgive my response/confusion but in using the web interface, where is this setting held?

bcolvin Wed, 04/21/2010 - 18:53

It should be under Security -> SSID towards the bottom of the page you will need to scroll the select Guest ID and the SSID you want broadcast.

Bill

chaznsc@@ Wed, 04/21/2010 - 19:34

I can get one or the other to broadcast but not both. What am I doing incorrect?

Leo Laohoo Wed, 04/21/2010 - 19:37

Go to Security > SSID Manager.  Highlight the SSID you want and go down and tick "Set SSID as Guest Mode". 

Actions

This Discussion

 

 

Trending Topics - Security & Network