04-21-2010 08:21 AM - edited 03-13-2019 06:57 PM
Hi Guys,
Since I am newbie in VoIP. May I know can a DID card support in MGCP? I only know this card can support in H.323.
If yes, could you please specified the command or show me the reference link?
Thanks in advance
Solved! Go to Solution.
04-27-2010 09:41 AM
You can do a mix and have the FXS/DID ports working as H.323 endpoints and the rest been manage by the MGCP protocol, or you could use everything in H.323.
HTH
Walter Solano
CCNA Voice
Cisco UCCX Specialist
04-26-2010 05:24 AM
Hello Kam,
As you mention the FXS/DID feature is support for H.323 gateways without any issue; but at this point we are not able to use or configure this feature for The MGCP Gateways.
HTH
Walter Solano
CCNA Voice
Cisco UCCX Specialist
04-26-2010 06:15 PM
Hi Walter,
Thanks for your help.
So does it mean that if I want to use DID card on a voice gateway and CUCM environment, I need to use both H.323 and MGCP protocol?
04-27-2010 09:41 AM
You can do a mix and have the FXS/DID ports working as H.323 endpoints and the rest been manage by the MGCP protocol, or you could use everything in H.323.
HTH
Walter Solano
CCNA Voice
Cisco UCCX Specialist
04-27-2010 06:25 PM
Hi Walter,
Thanks for your help!!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: