Is sleep mode available for 7911/42/62 IP Phones?

Unanswered Question
Apr 21st, 2010

Hello everyone,

I was wondering if it is possible to have 7911/42/62 phones go into sleep mode.  I don't see any timer settings at the device level as with the 7945/65 phones which allow them to go to sleep.  A client started a green initiative with the majority of phones being 79X2 integrated with CUCM 6.1.3-1000.16.

Does anyone know if there is some process to put the older model phones to sleep or is it not supported.  I've been given conflicting answers but no specific details.

Thank you for the help.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Rob Huffman Wed, 04/21/2010 - 13:22

Hi there,

Like Michael nicely noted (+5 "M" as always )

None of these models, 7911,7942 or 7962 support Sleep/Deep Sleep

or Power Save config's inherently. So you'll have to look at plan "B"

which comes at this question from a Switch/Switchport angle.

Enabling Green Practices

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/presentation_C97-466550.pdf


Power Management: Embedded Event Manager (EEM)

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps10195/white_paper_c11-514642.pdf


Turn off IP Phones Remotely

From Jimmy Ray & the awesome "Switchin Kitchen"

http://www.cisco.com/en/US/prod/switches/SK_E03.html

Cheers!

Huff


Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com/docs/DOC-8727

Actions

This Discussion