I have a 3750 stack as my aggregation point (10.10.10.3). Outbound traffic goes to ASA5510 (10.10.10.1) as do all my client gateways. I recently received a 1910 (10.10.10.10) to use as VPN router from an ISP vendor. I simply want to route traffic destined for 126.96.36.199 255.255.255.0 to the 1910 to go thru a VPN tunnel to the vendor. I used CNA to enable IP routing, and set a static map of 188.8.131.52 255.255.255.0 ->10.10.10.10, but I can't get traffic to flow. If I use windows routing commands, traffic goes fine. What am I missing? Do I need to point all my gateways to the 3750? Shouldn't the traffic that passes thru the 3750 to the ASA get sent to the 1910?
Sure, I could send out a GPO to do the routing, but isn't that what all this equipment is supposed to handle