SNMPv3 Traps issue

Unanswered Question
Apr 22nd, 2010
User Badges:

Hey all,


I have configured my routers with the following configuration


snmp-server ifindex persist 
snmp-server view ADMIN_VIEW iso included
snmp-server group ADMIN_GROUP v3 priv read ADMIN_VIEW  write ADMIN_VIEW


snmp-server user ADMIN_NMS_USER ADMIN_GROUP v3 auth sha pass123 priv des56 pass123


snmp-server enable traps snmp linkup linkdown
snmp-server host 10.1.1.1 traps version 3 priv ADMIN_NMS_USER


logging buffered 4096 notifications
logging trap notifications
logging source-interface FastEthernet0/1.1
logging 10.1.1.1
snmp-server trap-source FastEthernet0/1.1
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps envmon
snmp-server enable traps config
snmp-server enable traps ospf state-change
snmp-server enable traps ospf errors
snmp-server enable traps cpu threshold
snmp-server enable traps ipsla


I am able to poll the device and also receiving syslog messages but not traps when ospf adjacency changes or when ip sla reports failure.


Please help


Thanks


Zeeshan

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Joe Clarke Thu, 04/22/2010 - 17:33
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Try changing ADMIN_GROUP to:


snmp-server group ADMIN_GROUP v3 priv read ADMIN_VIEW write ADMIN_VIEW notify ADMIN_VIEW

Actions

This Discussion