Solved: WLC 4402

markfrasco · ‎04-22-2010

I have a WLC 4402 and reading it says it can handle 12, 25,or 50 AP's. How can I tell how many my appliance will actually controll?

John Cook · ‎04-22-2010

On the Monitor page in the gui at the top right above the image of the controller you will see the number of APs supported. (at least in 4.2.207.0 anyway). Or you can do a "show sysinfo" from the CLI.

-John

View solution in original post

John Cook · ‎04-22-2010

On the Monitor page in the gui at the top right above the image of the controller you will see the number of APs supported. (at least in 4.2.207.0 anyway). Or you can do a "show sysinfo" from the CLI.

-John

markfrasco · ‎04-22-2010

Thanks John