04-23-2010 03:53 AM - edited 03-11-2019 10:36 AM
Solved! Go to Solution.
04-23-2010 03:53 PM
Sure,..
Under the webvpn gateway section of the configuration, there is an option to configure ip address:
webvpn gateway ssl-gw
ip address
Here is the configuration guide for your reference:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htwebvpn.html#wp1054226
Hope that helps.
04-24-2010 03:57 PM
With IPSec VPN, you can use the "crypto map local-address" command to use a different interface (for example: using loopback interface, then you can assign the spare public ip address to your loopback interface).
Here is the command for your reference:
http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_c4.html#wp1049646
04-23-2010 03:57 AM
Unfortunately on ASA, you can only use the outside ip address, not any other ip address.
On IOS router however, you have the option to use a virtual ip address to terminate SSL.
04-23-2010 11:02 AM
Hi,
Thanks a ton for your valuable reply.
Can you please brief, How this is accomplished using Virtual IP address In IOS Router. If possible can you please share the link which shows the configuration example
thanks in advance
sairam
04-23-2010 03:53 PM
Sure,..
Under the webvpn gateway section of the configuration, there is an option to configure ip address:
webvpn gateway ssl-gw
ip address
Here is the configuration guide for your reference:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htwebvpn.html#wp1054226
Hope that helps.
04-24-2010 06:39 AM
Dear halijenn,
Thanks for the link provided. Very useful.
Whether this is applicable for IPSEC VPN too. Can I use the IP address other than Interface IP address for IPSEC VPN ?
Hope you will share your valuable comments
sairam
04-24-2010 03:57 PM
With IPSec VPN, you can use the "crypto map local-address" command to use a different interface (for example: using loopback interface, then you can assign the spare public ip address to your loopback interface).
Here is the command for your reference:
http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_c4.html#wp1049646
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide