cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1368
Views
0
Helpful
2
Replies

IAD2421 16FXS Does not work hookflash.

rost-beef
Level 1
Level 1

IAD 2421 16FXS  Does not work hookflash.

On the phone, press "flash" hear a click and the conversation continues!
And when speaking into the phone's voice comes back but a little to the effect of distortion.

What advise?

2 Replies 2

rost-beef
Level 1
Level 1

checked all the ports

HORRIBLE line noise in 1,3,4,5,6,7,8 port

I tried to config flash.

add

call application voice app-h450 flash:app-h450-transfer.2.0.1.0.tcl

voice-port 1/1
signal groundStart
cptone RU
timing hookflash-in 700
!
voice-port 1/2
signal groundStart
cptone RU
timing hookflash-in 700
!


dial-peer voice 102 pots
application app-h450  It did not help
destination-pattern 102
port 1/2

ios  123-26

debug

*Mar 1 02:00:38.555: htsp_process_event: [1/2, FXSLS_CONNECT, E_DSP_SIG_0100]fxsls_offhook_onhook, HF duration=700
*Mar 1 02:00:38.555: htsp_timer - 700 msec
*Mar 1 02:00:38.563: 723856 DPD state change disconnect to idle state
*Mar 1 02:00:39.027: 723903 DPD state change idle to db offhook 50
*Mar 1 02:00:39.043: [1/2] mc3810_report_sig_state: ABCD = 0xC
*Mar 1 02:00:39.043: port 2 changed state new state = 12
*Mar 1 02:00:39.043: htsp_process_event: [1/2, FXSLS_CONNECT, E_DSP_SIG_1100]fxsls_offhook_offhookhtsp_hook_flash_ind
*Mar 1 02:00:39.043: htsp_timer_stop
*Mar 1 02:00:39.047: [1/1, FXSLS_CONNECT, E_HTSP_HOOKFLASH] -> ERROR: INVALID INPUT
*Mar 1 02:00:39.087: 723908 DPD state change db dial to wait state
*Mar 1 02:00:43.467: 724347 DPD state change wait to db break 8
*Mar 1 02:00:43.475: 724347 DPD state change db break to break state 117
*Mar 1 02:00:43.595: 724359 DPD state change break to disconnect state 0
*Mar 1 02:00:43.595: [1/2] mc3810_report_sig_state: ABCD = 0x4
*Mar 1 02:00:43.595: port 2 changed state new state = 4
*Mar 1 02:00:43.595: htsp_process_event: [1/2, FXSLS_CONNECT, E_DSP_SIG_0100]fxsls_offhook_onhook, HF duration=700
*Mar 1 02:00:43.595: htsp_timer - 700 msec

I forgot to write that he had found the cause

"no bat-revers" in voice port fix problem

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: