I've a stack with 3 Catalyst WS-C3750G-24TS-S1U with IP Base software image.
Now I need to use PBR and so I need to upgrade to IP Service image.
I need to buy an upgrade for each member of the stack? Or I can buy just an upgrade for all the stack?
Then... just for confirm: the rule that I need to use is very simple, I have a routing table with some routes on 192.168.xx and 10.xxx and a default gateway at 192.168.2.110 that we use for internet browsing.
I would like that some hosts use another default gateway instead, and then I've thinked to set a policy like this:
ip access-list extended to201
deny ip any 192.168.0.0 0.0.255.255 deny ip any 10.0.0.0 0.255.255.255 permit ip 192.168.2.0 0.0.0.255 any deny ip any any
!route-map switchugw permit 10
match ip address to201
set ip next-hop 192.168.2.201
Interface Vlan 2
ip policy route-map switchugw
There is a way to do this with the feature of the ipbase?
I need to buy an upgrade for each member of the stack?
Or I can buy just an upgrade for all the stack?
No, each switch is treated as a separate entity in term of hardware and software support and licenses.