REP on 3750X

jecheand · ‎04-23-2010

Do anyone knows if the new catalyst 3750X supports the Resilient Ethernet Protocol (REP).

Thanks

Jon Marshall · ‎04-24-2010

jecheand@pe.ibm.com

Do anyone knows if the new catalyst 3750X supports the Resilient Ethernet Protocol (REP).

Thanks

Unfortunately no it isn't. The 3750X uses the same IOS feature sets as the 3750-E and according to Feature Navigator there is no support for REP. Of the 3750 switches only the 3750 Metro switches have support for REP.

Jon

Ganesh Hariharan · ‎04-26-2010

Do anyone knows if the new catalyst 3750X supports the Resilient Ethernet Protocol (REP).

Thanks

Hi,

Check out the below link for more information

http://www.cisco.com/en/US/solutions/collateral/ns341/ns524/ns562/ns577/case_study_c36-495769.html

Hope to Help !!

Remember to rate the helpful post

Ganesh.H

stevecullen · ‎09-04-2013

Release Notes for Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switches, Cisco IOS Release 15.0(2)SE and Later

New in Cisco IOS Release 15.0(2)SE

•Support for Resilient Ethernet Protocol (REP) is added for the IP Base package. REP is a Cisco proprietary protocol that provides an alternative to Spanning Tree Protocol (STP) to control network loops, handle link failures, and improve convergence time in ring topologies. REP controls a group of ports connected in a segment, ensures that the segment does not create any bridging loops, and responds to link failures within the segment. REP also supports VLAN load balancing. (IP Base image for Catalyst 3750-X, 3560-X, 3750-E and 3560-E switches.)