04-25-2010 02:55 AM - edited 03-11-2019 10:37 AM
Hi All,
I need your expert advice on the following:
In CISCO ASA 5510; I need to do a NAT for two internal IP's to one External IP in CISCO ASA. Please help me on this. I have one global entry for one internal ip which required to be included in above two IP's mentioned.
Eg.
NAT x.x.x.1 to 83.111.111.1
NAT x.x.x.2 to 83.111.111.1
How can I get this done?
Cheers,
Pradeepa
04-25-2010 03:05 AM
Hello,
Since you have not listed version, I'll assume it's 8.2.2 or lower.
access-list nat-to-one permit ip host 192.168.1.1 any
access-list nat-to-one permit ip host 192.168.1.2 any
nat (inside) 2 access-list nat-to-one
global (outside) 2 83.111.111.1
That should do the trick.
-skint
04-25-2010 03:32 AM
Hi,
Thank you fro your quick and correct answer. It is working now.
Cheers,
Pradeepa
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide