i have 1252 AG access point and 1242 AG connected to 3560G with power injector but i m
getting following error not able to enter in privilege mode of my access point
%CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 01:12:30.707: %DOT11-4-NO_SSID_OR_NO_VLAN: No SSID configured.
Dot11Radio1 not started.
*Mar 1 01:12:30.711: %DOT11-4-NO_SSID_OR_NO_VLAN: No SSID configured.
Dot11Radio0 not started.
i did a write erase command after that i m facing problem in my both AP before everything runing fine
Help me i shall be verythankful
How do you connect to APs? Console cable?
The message is telling you that the radio part of your APs is not configured properly, so you should have a look into this (or paste the radio config here).
Next, I don't fully understand what is the problem with the enable mode and what this have to do with the AP not being reachable. Please add some details.