cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
801
Views
0
Helpful
1
Replies

Broadcast specific static routes on EIGRP

dapogsdapogs
Level 1
Level 1

Hello,

I have EIGRP running on my network with the "redistribute static route" option. Is there a way to filter which static routes are broadcasted over EIGRP as I have some static routes that I don't want to be broadcasted.

1 Accepted Solution

Accepted Solutions

Jerry Ye
Cisco Employee
Cisco Employee

You can use the route-map option during redistribution to control which networks will be redistributed into EIGRP. The below example will block 10.10.10.0 and 11.11.11.0 while permitting everything else

ip access-list extended BLOCK_STATIC

permit 10.10.10.0

permit 11.11.11.0

route-map STATIC_ROUTES deny 10

match ip address BLOCK_STATIC

route-map STATIC_ROUTES perm 1000

router eigrp xx

redis static route-map STATIC_ROUTES

HTH,

jerry

View solution in original post

1 Reply 1

Jerry Ye
Cisco Employee
Cisco Employee

You can use the route-map option during redistribution to control which networks will be redistributed into EIGRP. The below example will block 10.10.10.0 and 11.11.11.0 while permitting everything else

ip access-list extended BLOCK_STATIC

permit 10.10.10.0

permit 11.11.11.0

route-map STATIC_ROUTES deny 10

match ip address BLOCK_STATIC

route-map STATIC_ROUTES perm 1000

router eigrp xx

redis static route-map STATIC_ROUTES

HTH,

jerry

Review Cisco Networking products for a $25 gift card