nv_done: unable to open "flash:/multiple-fs.new"[OK] on cisco WS-CBS3130X-S-F

Unanswered Question
Apr 27th, 2010
User Badges:

Hi,


I've got a new Cisco Catalyst WS-CBS3130X-S for Dell PowerEdge M1000e blade. When I save configuration by both command "write mem" and "copy run start" I got these:


Building configuration...


nv_done: unable to open "flash:/config.text.new"
nv_done: unable to open "flash:/private-config.text.new"
nv_done: unable to open "flash:/multiple-fs.new"[OK]


show flash


Directory of flash:/


%Error opening flash:/ (Invalid argument)


No space information available



I checked in Software Bug Toolkit ID CSCsq26410 but it seems not be able to help me because I dont use Stacking and my IOS is version 12.2(50)SE3 (cbs31x0-universal-mz.122-50.SE3.bin)


Is there any suggestion?


Thanks in advanced!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ganesh Hariharan Tue, 04/27/2010 - 03:31
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

Hi,


I've got a new Cisco Catalyst WS-CBS3130X-S for Dell PowerEdge M1000e blade. When I save configuration by both command "write mem" and "copy run start" I got these:


Building configuration...


nv_done: unable to open "flash:/config.text.new"
nv_done: unable to open "flash:/private-config.text.new"
nv_done: unable to open "flash:/multiple-fs.new"[OK]


show flash


Directory of flash:/


%Error opening flash:/ (Invalid argument)


No space information available



I checked in Software Bug Toolkit ID CSCsq26410 but it seems not be able to help me because I dont use Stacking and my IOS is version 12.2(50)SE3 (cbs31x0-universal-mz.122-50.SE3.bin)


Is there any suggestion?


Thanks in advanced!

Hi,


Check command dir flash command to determine if there are any old exception crashinfo files that can be deleted or old images that are not in use.To free up space to write configuration into memory, issue the write memory command.


Hope to help !!


Ganesh.H

dattx_fis2 Tue, 04/27/2010 - 04:29
User Badges:

Thanks Ganesh but unfortunately that it doesn't work: I can't execute command dir flash: or dir flash1:


dir
%Error opening flash:/ (Invalid argument)


dir flash
%Error opening flash:/flash (Invalid argument)


dir flash1:
%Error opening flash:/ (Invalid argument)


Anyway, thanks alot again!


Dat

Leo Laohoo Tue, 04/27/2010 - 15:48
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

When you attempted to execute the "dir" command were you in enable mode (curser should be a "#" instead of a ">")?

Ganesh Hariharan Tue, 04/27/2010 - 23:02
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

Thanks Ganesh but unfortunately that it doesn't work: I can't execute command dir flash: or dir flash1:


dir
%Error opening flash:/ (Invalid argument)


dir flash
%Error opening flash:/flash (Invalid argument)


dir flash1:
%Error opening flash:/ (Invalid argument)


Anyway, thanks alot again!


Dat

Hi Dat,


If the router/switch has a bad Flash, it will not be able to download the Cisco IOS software image. If you issue the show flash command, it will not be able to recognize the Flash.


Check out the below link


http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml


Hope to Help !!


Ganesh.H


Remember to rate Helpful post

Iain Westwood Mon, 08/23/2010 - 06:22
User Badges:

We've just had exactly the same error message with a member of our 4 switch Catalyst 3750-E stack. Running the "fsck" command resolved it for us.


Hope this helps.

M.Zaheer hussain Wed, 01/18/2012 - 01:16
User Badges:

hello sir


i have 2970G SWITCH and i want to delete flash with  switch: mod


but its not work properly


its created an error


File "flash:config.text" not deleted -- invalid argument

i hop you help me in this metter thnks

Actions

This Discussion