04-27-2010 06:31 AM
I have two cisco switches with 2 GBIC ports each. I want to link them with fiber.
I have two ws-g5484 that was gave to me. What else do I need to link these switches?
Do I need media converters and if so how many.
Thank You
Bo Hunter
04-27-2010 06:38 AM
hi Bo Hunter
Whats the switch model you are having over there?
You need SC / SC type connectors on both the side to connect the GBICs once you install them in the switch.
regds
04-27-2010 08:06 AM
Media converters are necessary only when your switch does not have the correct fiber interface available.
Make sure the GBIC you have is compatible with your switch using the link below.
GE GBIC Compatibility Matrix
Also, make sure your fiber is multimode (MMF) and that the link length meets the specs outlined in the data sheet, based on the fiber type:
GE GBIC Data Sheet
Let us know if you have additional questions.
Tom
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide