dial-peer matching

Unanswered Question
Apr 27th, 2010

I cannot figure out dial-peer matching.  I'm trying to point a phone number at a new place.  Unfortunately, the wildcard match for all of our numbers keeps matching.  I don't understand why.  I thought the longest match wins.

dial-peer voice 2001 voip
tone ringback alert-no-PI
preference 5
destination-pattern 432555....
progress_ind setup enable 3
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target ipv4:10.10.0.10
dtmf-relay rtp-nte
ip qos dscp cs4 signaling
no vad

dial-peer voice 2007 voip
tone ringback alert-no-PI
preference 1
destination-pattern 4325551212
progress_ind setup enable 3
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target ipv4:10.29.1.41
dtmf-relay rtp-nte
ip qos dscp cs4 signaling
no vad

2001 keeps matching.  What gives?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Brandon Buffin Tue, 04/27/2010 - 10:56

What is the inbound dial peer that is matching? What called number is the router seeing? You can run "debug voip dialpeer" to see these.

Brandon

Actions

This Discussion