User logon

Answered Question
Apr 27th, 2010

Hi! i create somes users with level 15 of privilege but i can only access with the admin user using ssh, telnet o http service. When i try using other users i can not access. Thank

Correct Answer by Ganesh Hariharan about 6 years 10 months ago

Hi! i create somes users with level 15 of privilege but i can only access with the admin user using ssh, telnet o http service. When i try using other users i can not access. Thank



Hi,


Check out the below link on local database configuration for line vty ,ssh etc.


http://www.cisco.com/en/US/products/sw/iosswrel/ps1818/products_configuration_example09186a0080204528.shtml


Hope to Help !!


Ganesh.H


Remember to rate helpful post

Correct Answer by Reza Sharifi about 6 years 10 months ago

have you enabled telnet ssh under the vty lines:


line vty 0 4
exec-timeout 60 0
privilege level 15
password damian
login local
length 35
transport input telnet ssh


And try again.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Federico Coto F... Tue, 04/27/2010 - 18:31

Damian,


Is this an IOS router, switch?

Do you have the SSH, telnet, HTTP services authenticating against the local database?


Federico.

Reza Sharifi Tue, 04/27/2010 - 19:20

Hi Damian,


If you create a user name without using a any authentication server it will be assassinated with a local database:


example:


username damian privilege 15 password damian123


This will give full privilege to the switch


HTH

Reza

Federico Coto F... Tue, 04/27/2010 - 19:38

Aside from creating the internal user database, you need to check that the SSH, HTTP, telnet, ect authentication is defined

to use local authentication.


For example, for HTTP you need:

ip http authentication local


For SSH and telnet you have to reference the lines vty to local authentication as well.


Federico.

Correct Answer
Reza Sharifi Tue, 04/27/2010 - 19:38

have you enabled telnet ssh under the vty lines:


line vty 0 4
exec-timeout 60 0
privilege level 15
password damian
login local
length 35
transport input telnet ssh


And try again.

Correct Answer
Ganesh Hariharan Tue, 04/27/2010 - 22:40

Hi! i create somes users with level 15 of privilege but i can only access with the admin user using ssh, telnet o http service. When i try using other users i can not access. Thank



Hi,


Check out the below link on local database configuration for line vty ,ssh etc.


http://www.cisco.com/en/US/products/sw/iosswrel/ps1818/products_configuration_example09186a0080204528.shtml


Hope to Help !!


Ganesh.H


Remember to rate helpful post

damianrodriguez Thu, 09/23/2010 - 09:07

I try but the command "login local" does not exist.

I have

Ports  Model              SW Version              SW Image
WS-C2960-24TC-L    12.2(35)SE5             C2960-LANBASEK9-M


I can not add a user with the same priv than admin.


Thanks

Actions

This Discussion

Related Content