Solved: Copy IOS .tar to a tftp server

reginaldjohnson · ‎04-27-2010

I'm unable to copy a Cisco WS-C3750G-12S IOS to a tftp server. The IOS is a directory but is there anyway of copying the .bin IOS. The current IOS is a .tar IOS which is a directory. Below is a copy of the sh boot.

Sh ver

BOOT path-list: flash:c3750-advipservicesk9-mz.122-25.SEE4/c3750-advipservicesk9-mz.122-25.SEE4.bin

Ganesh Hariharan · ‎04-27-2010

I'm unable to copy a Cisco WS-C3750G-12S IOS to a tftp server. The IOS is a directory but is there anyway of copying the .bin IOS. The current IOS is a .tar IOS which is a directory. Below is a copy of the sh boot.

Sh ver

BOOT path-list: flash:c3750-advipservicesk9-mz.122-25.SEE4/c3750-advipservicesk9-mz.122-25.SEE4.bin

Hi,

Check out the below link hope to Help !!

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00804799d7.shtml

Ganesh.H

Remember to rate helpful post

View solution in original post

Ganesh Hariharan · ‎04-27-2010

I'm unable to copy a Cisco WS-C3750G-12S IOS to a tftp server. The IOS is a directory but is there anyway of copying the .bin IOS. The current IOS is a .tar IOS which is a directory. Below is a copy of the sh boot.

Sh ver

BOOT path-list: flash:c3750-advipservicesk9-mz.122-25.SEE4/c3750-advipservicesk9-mz.122-25.SEE4.bin

Hi,

Check out the below link hope to Help !!

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00804799d7.shtml

Ganesh.H

Remember to rate helpful post

Hitendra Suthar · ‎10-30-2014

You can copy your switch's current TAR IOS file to TFTP.

You can use tftpd32 v3.3 and set some parameters so file can be copied .

tftpd32 - > Settings -> TFTP Configurations
timeout (seconds) - 1200
Max Transmite - 100000

Type command on Switch (privileged EXEC mode)
Switch(2960-X)#
Switch(2960-X)#archive upload-sw tftp://tftp -server-ipaddress/ios file name

Switch(2960-X)#archive upload-sw tftp://172.20.100.100/c2960x-universalk9-mz.150-2.EX5

if TFTP server is directly connected to switch than it will be good so packets will not be drop.

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_53_se/configuration/guide/2960scg/swiosfs.html#wp1258360

Thanks
Hitendra Suthar

Leo Laohoo · ‎04-27-2010

You want to copy the BIN file to the TFTP server? I don't know why you want to do that but the command is: copy flash1:c3750-advipservicesk9-mz.122-25.SEE4/c3750-advipservicesk9-mz.122-25.SEE4.bin tftp://

reginaldjohnson · ‎04-28-2010

Thanks. I was able to archive the .bin IOS and then copy the .bin IOS to a TFTP server. i appreicate everyones help.