cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1022
Views
0
Helpful
1
Replies

Can CER track VG224 ports?

JeffG1
Level 3
Level 3

Is there any way you can track VG224 ports in CER?

I would like to be able to set a location for individual VG224 ports.

1 Reply 1

Rob Huffman
Hall of Fame
Hall of Fame

Hi Jeff,

Even in the latest 7.0(3b) CER release, VG224 devices must be manually added;

Phones that you can manually define or track using IP subnet

•Analog phones, for example, phones connected to VG 224/248 and ATA devices

•Generic H.323 endpoints. Supported H.323 phones include Microsoft NetMeeting and video-enabled H.323 endpoints

These phones are only supported if their calls are routed by Cisco Unified Communications Manager.

Note Phones behind analog gateways must be added as manual phones even if a subnet is configured using Cisco ER where the gateway IP address is in that subnet. Phones behind Analog Telephony Adapters (ATAs) are not added as manual phones; they may show as unlocated phones if they are not located behind a switch port.

http://www.ciscoexpert.info/en/US/docs/voice_ip_comm/cer/7_0/english/release/notes/cer_703.html

Cheers!

Rob

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com/docs/DOC-8727

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: