MCU With Call Manager and CME Via Gatekeeper problem

Unanswered Question
Apr 27th, 2010
User Badges:

We having a problem when using MCU for Softphone with VideoAdvantage connect between Call Manager and CME via Gatekeepr(H323).

IF we using MCU for Video conference just only on Call Manager site, there is no problem. But when we need to use video conference from Call Manager to CME, there is no Video advantange pop-up on the screen. However we can solve this problem by uncheck (Media Termination Point Required) in Trunk configuration at Call Manager. But after we uncheck Media Termination Point Required, we unable to use basic telephony voice call  feature such as Hold,Transfer or Conference. I am not sure my configuration is wrong or not .


My Question.

Is it possible to use MCU conference for Softphone with VideoAdvantage conenect between Call Manager and CME on the same trunk while we still able to use basic telephony feature ?


For more understanding, please see diagram in the attached file.

Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content