I need some help. I have a cisco 6509 configured with a cisco NAM module. I have reset the config of the NAM module by the config clear command. Since this moment I can't no more ping the NAM module via the management port: OK via the 127.0.0.91 address and log in ok via the ios cli session command.
I tried to ping the NAM module from the switch and vice-versa and nothing happens. the gateway is well configured on the NAM:
[email protected]# show ip
IP address: 172.31.51.11
Subnet mask: 255.255.255.0
IP Broadcast: 172.31.51.255
DNS Name: NAM-6500-R2.localdomain
Default Gateway: 172.31.51.254
HTTP server: Enabled
HTTP secure server: Disabled
HTTP port: 80
HTTP secure port: 443
TACACS+ configured: No
[email protected]# ping 172.31.51.254
PING 172.31.51.254 (172.31.51.254) 56(84) bytes of data.
From 172.31.51.11 icmp_seq=2 Destination Host Unreachable
From 172.31.51.11 icmp_seq=3 Destination Host Unreachable
From 172.31.51.11 icmp_seq=4 Destination Host Unreachable
From 172.31.51.11 icmp_seq=5 Destination Host Unreachable
--- 172.31.51.254 ping statistics ---
5 packets transmitted, 0 received, +4 errors, 100% packet loss, time 3999ms
, pipe 3
I have already tried to reboot the module via the ios cli hw module command and nothing better.
Do you have any ideas?
Thanks by advance for any help,