Wireless telephony Question

Unanswered Question
Apr 28th, 2010
User Badges:

Hi all,


If I have wireless ip phone 7921 connected to access point.Access point is controlled by wireless access controller.


How RTP traffic moves?


wireless ip phone----->access point----->access controller----->access point------>wireless ip phone



or



wireless ip phone----->access point----->wireless ip phone


Any ideas?


BR,

Ahmed Kamal

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dancampb Thu, 04/29/2010 - 06:53
User Badges:
  • Cisco Employee,

Assuming the AP's are in local mode the traffic would go wireless ip phone----->access point----->access  controller----->access point------>wireless ip phone


If they phones are in H-REAP mode and the WLAN is locally switched then it would be wireless ip phone----->access point----->wireless ip phone

youssef.ahmed Thu, 04/29/2010 - 16:53
User Badges:

Can you explain this please


"

If they phones are in H-REAP mode and the WLAN is locally switched then it would be wireless ip phone----->access point----->wireless ip phone"


BR,

Ahmed

George Stefanick Tue, 05/04/2010 - 21:05
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, October 2015

To Dans point,


If you use HREAP local switching, your traffic generated on the HREAP ap dumps off on the ethernet and stays local to the office. Only control frames go across to the WLC. Make sense?

Actions

This Discussion