cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
979
Views
0
Helpful
2
Replies

LMS 3.2 : Can't collect inventory from Nexus 5010

adery6300
Level 1
Level 1

Hello,

I've added a Nexus 5010 to LMS, and it recognized it as such, and it was also able to archive its configuration.

But LMS is unable to collect inventory from it : the error message is "Device Sensed, but collection failed".

I am able to do an snmp walk of the device and I do see the ENTITY mib.

I am running LMS 3.2 with no RME patches or device package updates.

I've attached the relevant portion of IC_Server.log.

The Nexus 5010 is running NX-OS 4.1(3)N2(1a).

Thanks for the help,

Alex.

1 Accepted Solution

Accepted Solutions

yjdabear
VIP Alumni
VIP Alumni

>> I am running LMS 3.2 with no RME patches or device package updates.

So why not update the dev pkgs, then try again?

The latest RME pkg for Nexus is apparently v2.4, whereas I'm collecting the 5010s fine with v2.3.

704.1.3.6.1.4.1.9.12.3.1.3.798Cisco Nexus 5010 SwitchNexus2.3

View solution in original post

2 Replies 2

yjdabear
VIP Alumni
VIP Alumni

>> I am running LMS 3.2 with no RME patches or device package updates.

So why not update the dev pkgs, then try again?

The latest RME pkg for Nexus is apparently v2.4, whereas I'm collecting the 5010s fine with v2.3.

704.1.3.6.1.4.1.9.12.3.1.3.798Cisco Nexus 5010 SwitchNexus2.3

Allright.. it took me a lot of retrys, but I was eventually able to update to RME 4.3.1, and then update de Nexus package to 2.4, and it finally was able to inventory my Nexuses. Thanks !

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco