04-29-2010 12:10 PM
Hi Everyone
My Cisco LMS 2.6 installation reports a flapping port whenever a PC running Windows Vista Business is in power saving mode.
While this is not a major catastrophe, my syslog is filling up very quickly with more than 10,000 records within 24 hours.
Does anybody have any idea what to do? Is this problem solved with Windows 7?
Thanks.
- Andre
Solved! Go to Solution.
04-29-2010 04:25 PM
Whenever a PC/Laptop goes into the following states:
1. Sleep mode;
2. Log on/log off; and
3. Powers on
You'll see in the switch logs four error lines: 2 to report layer 1 going down and up and 2 to report layer 2 going down and up.
This is normal.
04-29-2010 03:32 PM
What does the log message look like?
Absent that and other details, I'd venture a guess that in a best-case scenario, this could be addressed by disabling "logging event link-status" globally on the switch, and selectively enabling it per-interface, such as on the uplinks only.
04-29-2010 04:25 PM
Whenever a PC/Laptop goes into the following states:
1. Sleep mode;
2. Log on/log off; and
3. Powers on
You'll see in the switch logs four error lines: 2 to report layer 1 going down and up and 2 to report layer 2 going down and up.
This is normal.
05-02-2010 02:12 PM
Thanks for the rating.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: