We just received a 3750 that was configured as a stack member. They just powered off the switches and send one to us, and I would like to use it as a stand alone with no stack configuration. I tried all the commands I know, and it still thinks its part of a stack. Do I need to use a different IOS? Is it possible to use 3750 without stacking it? Any idea how to completely get it to function as a standalone switch?
I understand the configuration which you need but as we think we can see that you are going to use 2 3750 switches and they definately are not going to get connected through a stack cable.
If they are not going to get connected through a stack cable then they will definately not goint to be in the same stack thsu they can work like stack master and that will not effect them.
And as we know that HSRP is Cisco's standard method of providing high network availability by providing first-hop redundancy for IP hosts on an IEEE 802 LAN configured with a default gateway IP address. so the 2 switch will work individuallly if they are not stacked.
If you want you can discuss the same with me on 408-916-9070 Ext 3076