channel bonding on autonomous 1250 AP

Unanswered Question
Apr 30th, 2010
User Badges:

Hello Everyone,


     I have a AP 1250 and I would like to channel bond with the 5-GHz 802.11n radio; to get more throughput. I have found some articals how to do this, but it's for the non autonomous AP GUI setup. Does anyone have the IOS commands to use and maybe an doc to go with it? Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Sun, 05/02/2010 - 14:42
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

HTML into your AP, go to Netowork Interfaces, 5GHz radio and click into the Settings Tab.


Go down to the "Channel Width" dropdown menu and choose "Above 40MHz".


For "n" to work, you need to have WPA2/AES or open authentication to work.


Hope this helps.  Please don't forget to rate our posts.

denis.roy Mon, 05/03/2010 - 17:51
User Badges:

Thanks for the replay; the AP is currently using above 40MHZ and WPA2/AES. And that's were I'm standing on this channel bonding.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode