Unity Connection Wav File

Neal haas · ‎04-30-2010

I have a department that is creating WAV files for Unity Conn they ar

e setting the sampling rate to the highest, Unity connection is not excepting this. What is the correct Sa

mpling rate for Unity? G.711 of course.

Thank you

David Hailey · ‎04-30-2010

This would be codec-based so for G.711, I believe that would be 64 kbit/s.

Hailey

Please rate helpful posts!

William Bell · ‎04-30-2010

Actually, 64kbs would be the line rate. The sampling rate should be 8 kHz/second with 8 bit samples (thus 64kbps). You can use an audio editing application to check the sampling rate.

See the following table for sampling rate and other pertinent information:

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/7x/design/guide/7xcucdg025.html#wp1069840

HTH.

Regards,

Bill

Please remember to rate helpful posts.

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify