Router 2801 don´t connect

Unanswered Question
Apr 30th, 2010
User Badges:

I have a router 2801, but i can't connect with the console cable, i prove many configurations and bits rate, but i can´t see data in the hyperterminal

thanks for your help

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
mathausxp Fri, 04/30/2010 - 17:27
User Badges:

I have a router CISCO 2801, but i cant get connected with the console cable; i've tried many configs and bit rate, but i cant see any data in the hyperterminal

sorry for the redaction, but my english is very bad.

Federico Coto F... Fri, 04/30/2010 - 17:32
User Badges:
  • Green, 3000 points or more


Things you can check:

1. Try different cable

2. Try from a different computer

3. Try using a different program such as Putty, Teraterm, SecureCRT, etc.

4. Check the lights on the 2801 to make sure it's booting fine.

Let's isolate the issue.


Reza Sharifi Fri, 04/30/2010 - 18:12
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 LAN

Hello Pedro,

In addition to what Federico said. Is the console cable connected to your PC or laptop by regular 9 pin adaptor that comes with Cisco devices or by USB?



mathausxp Wed, 05/05/2010 - 07:49
User Badges:

yes, i try with a pc using COM1, and with a laptop using a USB-serial adaptor.


This Discussion