I recently installed a 3560 switch in a network with 2 existing 2960 switches so we could route between VLANs. The VLAN routing appears to be working fine but when I attempt to move from the 2960 to the 3560 all of them move successfully except the AD/DNS host. The link status is slow in comming up but does eventually come up but the host cannot ping any of the other hosts on the switch. When I move it back to the original 2960 (any port in the VLAN) the link comes up almost immediately and the ip connectivity is normal. Also, when I try and move the host in question to the other 2960 I get the same problem. All other servers move over without issue. It's as if the NIC for that host is somehow bound to the original switch.
The original port and the new port are members of the same VLAN. The switches are connected via trunk ports (A->B, A->C, B->C) and each has VTP status as server. All hosts have only 1 NIC connected and other than the trunk ports there are no other connections between switches.
Can anyone suggest why this might be occurring?