cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
516
Views
0
Helpful
1
Replies

BGP redist into ospf

The_guroo_2
Level 2
Level 2

Guys we have a environemnt in which we are running ospf on your LAN side and BGP on WAN.....ospf is being redistributed into bgp and bgp is redistributed into ospf.....now we are getting default route and some specific routes from our provider.......i have done the following

router ospf 1

redistribute bgp subnets

will it work??? or do we have to add default-information command as well...........if yes why?? thanks

secondly AS-path prepend and MED.......both do the same thing why would we use MED instead of as path prepend and same as other way around

1 Accepted Solution

Accepted Solutions

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Khan,

the default route cannot be redistributed from BGP into OSPF, you need to use the default-information originate in OSPF router process for this.

MED effect is confined to peer AS only, AS path prepending effects propagate to the whole internet (unless an aggregate is created by some provider)

Hope to help

Giuseppe

View solution in original post

1 Reply 1

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Khan,

the default route cannot be redistributed from BGP into OSPF, you need to use the default-information originate in OSPF router process for this.

MED effect is confined to peer AS only, AS path prepending effects propagate to the whole internet (unless an aggregate is created by some provider)

Hope to help

Giuseppe

Review Cisco Networking products for a $25 gift card