cisco catalyst 2950 series FLASH formated

Answered Question
May 4th, 2010
User Badges:

Dear all


I have cisco 2950 series 24 port switch.


I have format flash directory of this switch. unintentionally now pls help me out what should i do for restoring ios of that switch.

Correct Answer by spremkumar about 7 years 2 months ago

hi


If your switch is in switch: mode then you can make use of the following link to upload the valid ios image back on to the flash


http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a0080094955.shtml


If your switch is in normal working condition and in normal switch prompt then you can make use of tftp copy to upload the ios back on the flash.


regds

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
spremkumar Tue, 05/04/2010 - 05:33
User Badges:
  • Red, 2250 points or more

hi


If your switch is in switch: mode then you can make use of the following link to upload the valid ios image back on to the flash


http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a0080094955.shtml


If your switch is in normal working condition and in normal switch prompt then you can make use of tftp copy to upload the ios back on the flash.


regds

Actions

This Discussion