Hi All,

first time request - hope someone can help...

i have purchased a Cisco 877W some weeks ago. i am trying to set it up over a home user ADSL service in the UK. The service is currently working using a basic netgear router.

i am hoping to replace the netgear to setup and test this router, but once setup the basic's using SDM the router is not able to succeed in all communication tests.

ERROR: no configured route to any of the DNS servers through the selected interface.

the router is connecting and obtaining a public address through DHCP from the ISP - however i am unable to get internet access from a client (on dhcp) and this DNS /exit interface test fails - (see above).

running config is as follows:

rtr-home-1#sho run
Building configuration...

Current configuration : 2045 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname rtr-home-1
!
boot-start-marker
boot-end-marker
!
enable secret 5
enable password
!
no aaa new-model
!
!
dot11 syslog
no ip routing
no ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1 10.10.10.9
ip dhcp excluded-address 10.10.10.100 10.10.10.254
!
ip dhcp pool ccp-pool1
   import all
   network 10.10.10.0 255.255.255.0
   dns-server 10.10.10.1
   default-router 10.10.10.1
!
!
ip name-server 10.10.10.1
!
!
!
!
!
archive
log config
  hidekeys
!
!
!
!
!
interface ATM0
no ip address
no ip route-cache
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
description $ES_WAN$
no ip route-cache
pvc 0/38
  encapsulation aal5mux ppp dialer
  dialer pool-member 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Dot11Radio0
no ip address
no ip route-cache
shutdown
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
!
interface Vlan1
ip address 10.10.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
no ip route-cache
!
interface Dialer0
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname USERNAME
ppp chap password 0 PASSWORD
ppp pap sent-username USERNAME password 0 PASSWORD
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 ATM0.1 (also tried "Dialer0")
!
ip http server
no ip http secure-server
ip nat inside source list 100 interface Dialer0 overload
!
access-list 100 remark CCP_ACL Category=2
access-list 100 permit ip 10.10.10.0 0.0.0.255 any
dialer-list 1 protocol ip permit
!
!
!
control-plane
!
!
line con 0
no modem enable
line aux 0
line vty 0 4
password PASSWORD
login
!
scheduler max-task-time 5000
end