05-04-2010 10:45 AM - edited 03-11-2019 10:41 AM
Hi,
I have an ASA5550 in production and I installed 8.3(1) to flash.
I'm just waiting to reload and instruct it to boot with 8.3(1)
There's multiple NAT configuration (static, policy, dynamic NAT/PAT)
ACLs referring the public IP (instead than the real IP)
Object-groups
It's a long configuration.....
My question is:
Is my understanding that I don't need to make any configuration changes (NAT and ACLs)?
The ASA will automatically convert all the commands to the new syntax?
Or I'm going to screw everything up?
Federico.
Solved! Go to Solution.
05-04-2010 01:53 PM
The ASA will migrate all those. So it should be transparent.
It will also keep a copy of the 8.2 config that will be named something like asa8.2.2....sav. So if need to downgrade use the downgrade command while at 8.3 and have it boot 8.2 with the .sav config.
I believe it will go smoothly though.
I hope it helps.
PK
05-04-2010 03:06 PM
Don't shoot the pianist if you discover some weird corner case defect.
The migration will happen automatically.
PK
05-04-2010 01:53 PM
The ASA will migrate all those. So it should be transparent.
It will also keep a copy of the 8.2 config that will be named something like asa8.2.2....sav. So if need to downgrade use the downgrade command while at 8.3 and have it boot 8.2 with the .sav config.
I believe it will go smoothly though.
I hope it helps.
PK
05-04-2010 02:54 PM
Thank you PK!
I'll give you a +5 if it goes smoothly ;-)
I'll get back to you soon....
Federico.
05-04-2010 03:06 PM
Don't shoot the pianist if you discover some weird corner case defect.
The migration will happen automatically.
PK
05-05-2010 09:42 AM
Hey PK guess what?
It worked automatically without any problems (just as you said) ;-)
Thank you very much.
Federico.
05-05-2010 09:51 AM
Good news! Great!
PK
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: