ip ospf mpls traffic-eng link

Unanswered Question
May 4th, 2010

Hi,

Is there anybody knows how the maximum bandwidth for an MPLS TS link is calculated? Litterature seems to indicate that it corresponds to interface bandwidth command but I do not think that this is the case.

pauillac#show ip ospf mpls traffic-eng link

OSPF Router with ID (1.1.1.1) (Process ID 100)

Area 0 has 2 MPLS TE links. Area instance is 6.

Links in hash bucket 8.

Link is associated with fragment 1. Link instance is 6

Link connected to Broadcast network

Link ID : 10.1.1.2

Interface Address : 10.1.1.1

Admin Metric te: 1 igp: 1

Maximum bandwidth : 12500000

Maximum reservable bandwidth : 64000

Number of Priority : 8

Priority 0 : 64000 Priority 1 : 64000

Priority 2 : 44250 Priority 3 : 44250

Priority 4 : 44250 Priority 5 : 44250

Priority 6 : 44250 Priority 7 : 44250

Affinity Bit : 0x0

The maximum bandwidth for a 100 Base T interface is 12500000 and 1250000 for a 10 Base T interface. In fact, it seems that the interface bandwidth is multiply by 125.

Thanks Steph1963



body>

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion