OSPF trap appears to have wrong OID - IOS 12.2

Unanswered Question
May 4th, 2010
User Badges:

Hi,


I have notoiced that some of our devices are generating OSPF traps with what appears to be the wrong OID, and as a consequence it is not coming through formatted properly.


We have a few CAT 4500 devices running IOS 12.2, and these devices are sending OSPF traps with the following OID:

.1.3.6.1.2.1.14.16.0.2


We have other devices, of various models, running IOS 12.4, and they send the OSPF traps with the following OID:

.1.3.6.1.2.1.14.16.2.0.2


The MIB definition I use, has the .1.3.6.1.2.1.14.16.2.0.2 definition, ie the extra 2 in it.


I am wondering if it has been corrected in a later IOS version, and therefore I am going to have to upgrade the IOS version to correct this? Or, is there something else I am missing?


Regards

Jeff

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ganesh Hariharan Wed, 05/05/2010 - 01:28
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

Hi,


I have notoiced that some of our devices are generating OSPF traps with what appears to be the wrong OID, and as a consequence it is not coming through formatted properly.


We have a few CAT 4500 devices running IOS 12.2, and these devices are sending OSPF traps with the following OID:

.1.3.6.1.2.1.14.16.0.2


We have other devices, of various models, running IOS 12.4, and they send the OSPF traps with the following OID:

.1.3.6.1.2.1.14.16.2.0.2


The MIB definition I use, has the .1.3.6.1.2.1.14.16.2.0.2 definition, ie the extra 2 in it.


I am wondering if it has been corrected in a later IOS version, and therefore I am going to have to upgrade the IOS version to correct this? Or, is there something else I am missing?


Regards

Jef

Hi Jef,


Try with below mentioned MIB for OSPF traps


http://www.oidview.com/mibs/0/OSPF-TRAP-MIB.html


Hope to Help !!


Ganesh.H

Actions

This Discussion