wireless Accesspoint 1140

Unanswered Question
May 5th, 2010

Dear Sir,


        I need to configure accesspoint 1140 in my local lan. I have 5 vlans in my network.


when i configure all ssid and vlan in 1140 i am unable to ping from 1140 to my other vlans except that vlan which are assign to ssid.  from other vlans to 1140 interface ip also not pinging.


Done things:-  I trunk 2960 switch port which is connected to 1140 access point.

                     3750 i configure dhcp pool for two SSID which i configure on 3750 with vlan created on 1140 and 3750.


can you tell what i have to do on switch side and accesspoint. to ping from access point to other vlans and other vlans to access point.


i am new on cisco.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Wed, 05/05/2010 - 02:47

Would be nice if you can post your config for us to have a review. 

mrsystemengineer Wed, 05/05/2010 - 03:44

Dear Friend,


               I did not configured right know, suppose new access point 1140 and i  need to connect to switch 2960.  I have 5 vlans on switch.  Just i trunk  that port which i need to connect 1140.  but when i was connected  accesspoint to switch with manual ip address it will not ping from  access point to other vlan or even default gateway of access point.


            what i have to do?

mrsystemengineer Wed, 05/05/2010 - 03:10

Dear Friend,


              I did not configured right know, suppose new access point 1140 and i need to connect to switch 2960.  I have 5 vlans on switch.  Just i trunk that port which i need to connect 1140.  but when i was connected accesspoint to switch with manual ip address it will not ping from access point to other vlan or even default gateway of access point.


           what i have to do?

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode