Jatin Katyal Wed, 05/05/2010 - 05:27
User Badges:
  • Cisco Employee,

Hi,


I'm assuming that you have ACS version 4.x. Please go through the attached document for ACS and AD integration. In case you have ACS version 5.x then please let me know, I'll send you steps for that as well.


Regards,

JK


Do rate helpful posts-

Joseph Dworak Sat, 05/08/2010 - 18:05
User Badges:

If you could provide the 5.x doc for me I would appreciate it.

Jatin Katyal Tue, 05/11/2010 - 06:12
User Badges:
  • Cisco Employee,

Joseph,


There is no specific document for ACS 5.x out yet. However, below listed links covers everything whatever you needed.



Joining ACS to an AD Domain
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/users_id_stores.html#wp1140906


ACS 5.1 has to be configured with a valid NTP server for time synchronization, preferably from where the domain controller is syncing its time. Another one is a valid DNS server which can resolve internal  names.


Both of them will be configured from the CLI:
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_use.html#wp1096003


ip name-server
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1729536


Ntp server
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1013780


HTH

JK


Plz rate helpful posts-

Actions

This Discussion