Some Cisco 857s go into rommom mode after reboot

Unanswered Question
spremkumar Wed, 05/05/2010 - 07:47


Can you post the output of show version and also the show run here to check / see if all is well from the config prespective.



Sorry the delay. Here's the she ver from my own router which had this problem late last year.

mx_testuser#sh ver
Cisco IOS Software, C850 Software (C850-ADVSECURITYK9-M), Version 12.4(15)T7, RE
Technical Support:
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 14-Aug-08 07:18 by prod_rel_team

ROM: System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE

mx_testuser uptime is 27 weeks, 1 day, 4 hours, 28 minutes
System returned to ROM by power-on
System image file is "flash:c850-advsecurityk9-mz.124-15.T7.bin"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to
[email protected].

Cisco 857 (MPC8272) processor (revision 0x400) with 59392K/6144K bytes of memory
Processor board ID FCZ1314117B
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
4 FastEthernet interfaces
1 ATM interface
128K bytes of non-volatile configuration memory.
20480K bytes of processor board System flash (Intel Strataflash)

Configuration register is 0x2102



This Discussion